Table of Contents
Advertisement
3
Machine installation
4
3
2
1
3.1
Positioning
Prepare an ample support base for the machine that
is suitable to support its weight (3). It is important for all
terminals of connections to the water mains (12) and to
the electrical mains (9) to be easily reachable and in any
case in the immediate vicinity of the machine.
Make sure that there is sufficient space for placing
and correctly using the appliance. The grinding-dosing
machine (4) must be placed in the immediate vicinity
of the appliance in order to allow for comfortable use
of the machine.
Place the motor pump (13) in a protected area
without humidity and far from accidental contact with
the operator. It is advisable to equip the working base of
16
6
5
12
the machine with a drawer (1) for used coffee grounds,
preferably with a rubber device (2) for tapping the filter
holder.
16
13
14
!
In case of installation of the machine within
moving environments (trains, ships, etc.) it is
necessary to use special anchor pins, which can
be bought from the manufacturer, to the base.
!
For correct operation, the machine must rest on a
perfectly horizontal surface. Any alignment of the
machine must be done by adjusting the feet (8).
7
8
9
10
11
15
Technical manual
Advertisement
Table of Contents
