Table of Contents
Advertisement
2.3
Equipment preparation
Water purification filter or Softener
The water purification filter or resin softener are
available on request.
For more information see the chapters "Water
purification filter" and "Softeners".
Filter holder
In the housing of the filter holder(1), place the spring
to stop the filter (2). Take the two cups (3) or one-cup
(4) filter and press it firmly into the filter holder.
Spouts
Complete the filter holder by installing the two-cup
(6) or one-cup (5) spout.
3
2
1
6
5
i
Install the spout with related filter: 1 cup spout
on 1 cup filter filter holder, etc.
Technical manual
Motor pump
For machines with an external motor, it is necessary
to prepare the pump and motor.
Fit the 3/8 gas connection with filter (2) at the pump
inlet (arrow ) and the plain 3/8 connection (1) at the
pump outlet (arrow ).
Use the special washers (3) provided for sealing
purposes.
To correctly couple the pump and motor, use the
appropriate joint (4) and the spacer ring (5), lock
everything with the two clamps (6).
The pump and motor joint has to be installed also on
the machines with an internal motor pump.
!
4
3
6
5
4
6
Install the connection with the inlet filter
of the pump (arrow
).
(2)
1
2
3
15
Advertisement
Table of Contents
