Table of Contents
Advertisement
1.5
Specifications
The machine is identified by the identification plate
affixed on the base of the frame under the drain tray,
on which are listed the identification data and the CE
marking attesting compliance.
For the following information, always refer to the
nameplate of the machine:
• type and model of the machine (to be reported in
every communication);
• machine serial number (required to be reported in
every communication);
• date of manufacture (month and year);
• indication on power and pressure type on the mains.
The data of the appliance can be seen also on the
label located on the package of the machine.
!
It is forbidden to remove or damage the
plates. If necessary, replace urgently,
contacting the manufacturer always and
exclusively.
specifica-
tion plate
Groups
Power supply voltage
Total power
Power x group
Coffee water tank heating element power per group
Steam boiler power
Steam boiler capacity
Coffee water tank capacity
Width
Depth
Height
Net weight
Operating conditions
Technical manual
1.6
Intended use
The machine object of this Manual consists of
mechanical, electrical, and electronic components whose
combined action allows to make milk, coffee and water-
based beverages.
This machine must be used exclusively for its intended
use.
This machine is designed and constructed to operate
only after being properly connected to a hydraulic and
electrical network and placed so as to be sheltered from
atmospheric agents.
The overview constitutes the use for which
it was designed, created and protected.
!
Non-compliance with and/or non-adherence
to the technical parameters described
below, their tampering with and/or generic
variation, are strictly prohibited. Any other
use is considered improper and therefore
dangerous.
2
V
230/400
240/415
W
4,400
4,700
W
150x2
165x2
W
1,000x2
1,090x2
W
3,000
3,270
lt / UK gal
8 / 1.76
lt / UK gal
(1.2/ 0.26)x2
mm / in
830 / 32.7
mm / in
580 / 22.8
mm / in
575 / 22.6
kg / lb
74 / 163
°C / °F
3
4
230/400
240/415
230/400
5,500
6,100
7,100
150x3
165x3
150x4
1,000x3
1,090x3
1,000x4
3,000
3,270
5,000
13 / 2.86
13 / 2.86
(1.2/ 0.26)x3
(1.2/ 0.26)x4
1070 / 42.1
1310 / 51.8
580 / 22.8
580 / 22.8
575 / 22.6
575 / 22.6
94 / 207
110 / 243
5 ÷ 40 / 41 ÷ 104
240/415
7,700
165x4
1,090x4
5,445
13
Advertisement
Table of Contents
