Table of Contents
Advertisement
2
Preparation
2.1
Unpacking the machine
Upon receipt of the machine, make sure that it has not
been damaged during transport and that the package
has not been tampered with, resulting in removal of
parts from the inside.
If there are damages or missing parts, inform the
carrier and the manufacturer immediately, producing
photographic documentation.
If there is an external motor pump (optional), the
motor and the pump are provided in a separate package.
Remove the machine from its packaging only at the
moment of installation to prevent accidental collisions
that can damage it.
• Open the packaging, taking care not to damage the
machine;
• remove and take out the protections of the machine
and equipment contained in the package.
• take the machine out;
• dispose of the packaging in compliance with waste
regulations.
14
Wood, nails, staples, cardboard: non-polluting
!
material but to be recycled properly.
Plastic: polluting material neither to
be burned (danger of toxic fumes), nor
dispersed in the environment; to be disposed
of according to current regulations.
Handling operations must always and exclusively
be performed by qualified personnel and in
compliance with applicable safety and health
regulations.
!
Before starting transport and/or handling,
verify the route, dimensions needed, safety
distances, places suitable for placement, and
appropriate means to the operation.
Handling operations must be carried out by
at least 2 people, or with the help of special
lifting accessories.
!
In view of the substantial weight of the
equipment, take great care in handling and use
suitable protective gloves.
2.2
Storage
If the machine is not going to be used for a long
period, we recommend to render it inoperative
disconnecting the power cord from the supply and
emptying it of the water.
Technical manual
Advertisement
Table of Contents
