Table of Contents
Advertisement
7.7
Milk foaming nozzle
The milk foaming nozzle lets you foam and heat milk.
• Insert the nozzle (A) in the milk so that the sprayer is
completely covered;
• turn the steam tap (B) counterclockwise;
• wait for the milk to heat and foam;
• upon reaching the desired temperature and foaming,
turn the steam tap (B) clockwise.
To adjust the foaming of the milk: unscrew the cap (C)
of the regulator and use a screwdriver on the screw (D).
To increase foaming, turn counterclockwise; to reduce
foaming, turn clockwise.
B
A
To keep the milk foaming nozzle in perfect working
order, it is advisable to carry out a delivery dry run
!
after each use. Keep the ends of the of the nozzle
clean at all times by means of a cloth dampened in
lukewarm water. Handle the nozzle with utmost
caution due to the hazard resulting from the
presence of high-temperature steam.
Technical manual
7.8
Autosteamer
The "Autosteamer" system
can be used for automatically
heating and foaming milk at the
programmed temperature.
It can be controlled using the
keypad (16) located on the left
base of the machine.
There are 4 different selections
available:
Short autosteamer dose.
Long autosteamer dose.
Heating.
Manual steam + foaming.
C
!
Before using the steam to heat beverages or to
D
foam milk, you should first let some steam off until
all the condensation water is released.
7.8.1
Autosteamer operation
Proceed as follows:
• Immerge the tips of the autosteamer (14) into the
beverage;
• press the
or
milk in the jug;
• wait until the delivery is finished;
• when the delivery is finished, the milk will be foamed
and heated at the preset temperature.
• To stop delivery in advance, press the same key again;
• to prolong steam delivery, hold down the selected
dose key.
• for more or less foam, adjust the special regulator (11).
Turning it clockwise will decrease the consistency,
while turning it counter-clockwise will increase it.
14
16
key, depending on the dose of
11
33
Advertisement
Table of Contents
