Astoria Plus4YouTS Use And Maintenance Manual page 53

There are three thresholds (ABC) to request
intervention, which can be programmed separately.
To modify the assistance thresholds, proceed as
follows:
select the desired maintenance threshold, eg. C:
Service C
Service Cycles Performed Cyc.
Press "Service Cycles" and select the threshold for
the service cycles for which to require the maintenance
service:
Service Cycles
Service Cycles
The system displays an alert when there are less than
1000 cycles to reach the programmed threshold.
To reset the executed cycles counter proceed as
follows:
• press the reset key (
• in the next screen answer "Yes";
• performed cycles count will restart from 0.
i
Setting a value of 000000 the scheduled assistance
service s excluded.
Technical manual
);
To display and modify the timed assistance thresholds,
proceed as follows:
• Scroll through the screens with the arrows () or (),
until you see the screen below:
Maintenance
Total cycles
Date Ins.
Service Plan
Total cycles Total number of selections made on the machine.
Machine installation date or date of activation of timed
Instasll. date
service.
Service Plan Scheduled date of required assistance.
• Set a request date for scheduled maintenance (Ser-
vice Plan);
• The system begins to notify the user 15 days before
the scheduled date.
i
The scheduled assistance setting and resetting of
cycle counters are reserved for a technician.
53