Table of Contents
Advertisement
12.3
Ad j u s t m e n t o f t h e g ro u p s
temperature
To modify the temperature of the
single delivery groups, proceed as follows:
Groups temp
• Pressing "Groups temp.", displays the adjustment
screen.
• Adjust the parameters via the slider close to the de-
sired value, then use "-" and "+" for higher accuracy.
Group
Select the group to be operated.
Temperature Dispensing unit temperature.
12.4
Adjusting the cup heater temperature
To modify the cup heater temperature, proceed as
follows:
Cup heater temp
• Pressing "Cup heater", displays the adjustment screen.
• Adjust the parameters via the slider close to the de-
sired value, then use "-" and "+" for higher accuracy.
i
If a temperature above 114°C is set, the indication
"CUP HEATER ON" appears on the display and the
cup heater's continuous operation is enabled.
When setting a temperature below 70°C, the
i
indication "--" appears on display and the cup
heater is disabled. Deactivation of the cup heater
by a technician does not allow the user to activate
the cup heater with the (
main screen.
40
12.5
Energy Saving
Energy saving
Time On
StandBy1
StandBy2
Rest
Time On
Stand By 1
Stand By 2
Rest
required boxes and adjusting the hour and minute.
Time On
Hour
Minutes
i
i
) button on the
Programming of Energy Saving time
and groups stand-by
To program the machine (Energy
Saving) and groups (stand-by) start-
up and operating times at reduced
temperature, proceed as follows.
• Pressing "Energy Saving" displays the
screen below.
Where:
controls the turn-on time of the machine.
controls the first time frame of the machine in
stand-by.
controls the second time frame of the machine
in stand-by.
controls the turn-off time of the machine.
You can change the time frames by pressing the
If you want to program the stand-by and/or
inactivity time of the machine, set the hour to
00:00.
If the machine is in stand-by or idle, it will be reported
on the main screen with the symbol
respectively.
or
Technical manual
Advertisement
Table of Contents
