Core200
Hot water (SAE Version)
7.3
• Place the pot under the hot water
spout;
• Press the
button for at least
5 seconds until the
flashes ;
• Press the
button;
• To confirm the dose, press the
button again;
• when the programming is complete, press the
button, or wait 20 seconds.
Avoid contact with the hot water nozzle, do not place your hands
or other body parts near the hot water nozzle tips.
30
54
of
button
Pre-set values
7.4
Use this procedure to reset the factory values both
for the coffee beverage doses.
Proceed as follows:
• Turn the machine OFF;
• switch the machine and press and hold down the
(1)
, (3)
and (5)
pushbutton panel;
• release the buttons only after having checked that
the LED
keys of everyone push-buttons panels
is flashing;
• turn the machine OFF and ON.
1
2
buttons of the right
3
4
5
TECHNICIANS' manual