Electrocution Hazards - JLG 1350SJP Operation And Safety Manual

SECTION 1 - SAFETY PRECAUTIONS
• Before operating the machine, make sure all gates are
closed and fastened in their proper position.
• Keep both feet firmly positioned on the platform floor at all
times. Never use ladders, boxes, steps, planks, or similar
items on platform to provide additional reach.
• Never use the boom assembly to enter or leave the plat-
form.
1-4
• Use extreme caution when entering or leaving platform.
Be sure that the boom is fully lowered. It may be neces-
sary to telescope out to position the platform closer to the
ground for entry/exit. Face the machine, maintain "three
point contact" with the machine, using two hands and one
foot or two feet and one hand during entry and exit.

Electrocution Hazards

• This machine is not insulated and does not provide pro-
tection from contact or proximity to electrical current.
– JLG Lift – 3121141