JLG 1350SJP Operation And Safety Manual page 45

18. Steer Select
When equipped with four wheel steering, the action of
the steering system is operator selectable. The center
switch position gives conventional front wheel steering
with the rear wheels unaffected. This is for normal driv-
ing at maximum speeds. The forward position is for
"crab" steering. When in this mode both front and rear
axles steer in the same direction, which allows the chas-
sis to move sideways as it goes forward. This can be
used for positioning the machine in aisle ways or against
buildings. The back switch position is for "coordinated"
steering. In this mode the front and rear axles steer in
the opposite directions to produce the tightest turning
circle for maneuvering in confined areas.
3121141
SECTION 3 - MACHINE CONTROLS AND INDICATORS
ONLY USE THE PLATFORM LEVELING OVERRIDE FUNCTION FOR
SLIGHT LEVELING OF THE PLATFORM. INCORRECT USE COULD CAUSE
THE LOAD/OCCUPANTS TO SHIFT OR FALL. FAILURE TO DO SO COULD
RESULT IN DEATH OR SERIOUS INJURY.
19. Platform Leveling Override
A three position switch allows the operator to adjust the
automatic self leveling system. This switch is used to
adjust platform level in situations such as ascending/
descending a grade.
20. Horn
If pressed, this switch supplies power to the horn.
– JLG Lift – 3-13