Section 4. Machine Operation; Description; Boom Operating Characteristics And Limitations; Capacities - JLG 1350SJP Operation And Safety Manual

4.1

DESCRIPTION

This machine is a self-propelled hydraulic lift equipped with a
work platform on the end of an elevating and rotating boom.
The primary operator control station is in the platform. From
this control station, the operator can drive and steer the
machine in both forward and reverse directions. The opera-
tor can raise or lower the upper or lower boom or swing the
boom to the left or right. Standard boom swing is 360 degree
continuous left and right of the stowed position. The machine
has a Ground Control Station which will override the Platform
Control Station. Ground Controls operate Boom Lift and
Swing, and are to be used in an emergency to lower the plat-
form to the ground should the operator in the platform be
unable to do so.
3121141

SECTION 4. MACHINE OPERATION

4.2

Capacities

– JLG Lift –
SECTION 4 - MACHINE OPERATION
BOOM OPERATING CHARACTERISTICS AND
LIMITATIONS
The boom can be raised more than 15° above horizontal with
or without any load in platform, if:
1. Machine is positioned on a smooth, firm and level sur-
face.
2. Axles are extended.
3. Load is within manufacturer's rated capacity.
4. All machine systems are functioning properly.
5. Proper tire pressure.
6. Machine is as originally equipped from JLG.
4-1