JLG 1350SJP Operation And Safety Manual page 43

6. Main Telescope
This control allows extension and retraction of the main
boom.
7. Lights (If Equipped)
This switch operates accessory light packages if the
machine is so equipped.
8. Jib Lift
Push forward to lift up, pull back to lift down. Variable lift
speed is using the Function Speed Control.
9. Soft Touch Override Switch (If equipped)
This switch enables the functions that were cut out by
the Soft Touch system to operate again at creep speed,
allowing the operator to move the platform away from
the obstacle that caused the shutdown situation.
3121141
SECTION 3 - MACHINE CONTROLS AND INDICATORS
NOTE: The Jib Swing function is not operable when the Capacity
Select control is in the 1000 lb. (454 kg for ANSI markets
and 450 kg for CE and Australia markets) position.
10. Jib Swing
This switch allows the operator to rotate the jib to the left
or right.
11. Axle Extend/Retract
This switch allows the operator to extend or retract the
axles. The axles can only be extended or retracted while
the machine is being driven forward or reverse.
12. Soft Touch Indicator (If Equipped)
Indicates the Soft Touch bumper is against an object. All
controls are cut out until the override button is pushed,
at which time controls are active in the Creep Mode.
13. Platform Rotate
This switch allows the operator to rotate the basket to
the left or right.
– JLG Lift – 3-11