Tires & Wheels - JLG 1350SJP Operation And Safety Manual

15. Platform Filter
Lube Point(s) - Replaceable Element
Interval - Change after first 50 hours and then every year
or 600 hours of operation thereafter
3121141
SECTION 6 - GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
6.4
Tire Inflation
Tire Damage
For pneumatic tires, JLG Industries, Inc. recommends that when
any cut, rip, or tear is discovered that exposes sidewall or tread
area cords in the tire, measures must be taken to remove the
JLG product from service immediately. Arrangements must be
made for replacement of the tire or tire assembly.
For polyurethane foam filled tires, JLG Industries, Inc. recom-
mends that when any of the following are discovered, measures
must be taken to remove the JLG product from service immedi-
ately and arrangements must be made for replacement of the
tire or tire assembly.
– JLG Lift –
TIRES & WHEELS
The air pressure for pneumatic tires must be equal to the air
pressure that is stenciled on the side of the JLG product or
rim decal for safe and proper operational characteristics.
• a smooth, even cut through the cord plies which
exceeds 3 inches (7.5 cm) in total length
• any tears or rips (ragged edges) in the cord plies
which exceeds 1 inch (2.5 cm) in any direction
• any punctures which exceed 1 inch in diameter
6-23