JLG 1350SJP Operation And Safety Manual page 101

NOTE: After S/N 0300134389 machines may be built with either
Bonfiglioli or Reggiana Riduttori wheel drive hubs.
4. A. Wheel Drive Hub (Prior to S/N 100131)
Lube Point(s) - Level/Fill Plug
Capacity - 0.5 liters (1/2 full)
Lube - EPGL
Interval - Change after first 150 hours then every 1200
hours of operation
3121141
SECTION 6 - GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
– JLG Lift –
B: Wheel Drive Hub (S/N 100131 to Present)
Lube Point(s) - Level/Fill Plug
Capacity - 2.1 quarts (2 liters) ± 10%
Lube - EPGL
Interval - Change after first 150 hours then every 1200
hours of operation
Comments - Place Fill port at 12 o'clock position and
Check port at 8 o'clock position. Pour lubricant into fill
port until it just starts to flow out of check port.
6-17