Advanced View - Lightware HDMI-3D-OPT-TX210RAK User Manual

6.10. Advanced view

Advanced view is the surface for LW3 protocol tree with a terminal window. Commands and
specific parameters (which are not available on the graphical user interface of the LDC)
can be run and set.
2
3
1
2
3
4
5
Page 48 / 106
Edit mode
The default appearance is the read-only mode. If you want to
modify the values or parameters, tick the option. You will be
prompted to confirm your selection.
Terminal window Commands and responses with time and date are listed in this
window. Sent command is displayed in red and starts with '>'
character, received response is displayed in blue and starts
with '<' character. The content of the window can be emptied
by the Clear button. If the Autoscroll option is ticked, the list is
scrolled automatically when a new line is added.
Command line Type the desired command and execute it by the Send button.
Protocol tree LW3 protocol tree; select an item to see its content.
Node list
Correspondent parameters and nodes are shown which are
connected to the selected item in the protocol tree.
Manual button: Manual (short description) of the node can
be called and displayed in the terminal window. See more
information about manuals in section
Set button: Saves the value/parameter typed in the textbox.
Call button: Calls the method, e.g. reloads factory default
settings.
1
4
8.3.4
5
on page 69.
Software control