Advanced View Window - Lightware HDMI-TPS-TX210 User Manual


  
5. Software Control - Lightware Device Controller
5.11. Advanced View Window
1
4
5
LW3 protocol help Pushing the button results a help window opening which describes the most
1
important information about LW3 protocol commands in HTML format.
Edit mode The default appearance is the read-only mode. If you want to modify the
2
values or parameters, tick the option. You will be prompted to confirm your
selection.
3 Warning mode If this pipe checked in, a warning window pops up when you enable Edit mode.
4 Terminal window Commands and responses with time and date are listed in this window. Sent
command starts with '>' character, received response starts with '<' character.
The color of each item depends on the type of the command and response.
The content of the window can be emptied by the Clear button. If the Autoscroll
option is ticked, the list is scrolled automatically when a new line is added.
5 Command line Type the desired command and execute it by the Send button. Clear all current
commands and responses in the Terminal window by the Clear button.
6 Protocol tree LW3 protocol tree; select an item to see its content.
7 Node list Correspondent parameters and nodes are shown which are connected to the
selected item in the protocol tree.
Manual button:
Set button:
Call button:
2 3
6
Manual (short description) of the node can be called and
displayed in the terminal window.
Saves the value/parameter typed in the textbox.
Calls the method, e.g. reloads factory default settings.
HDMI-TPS-TX200 series – User's Manual
7
41