Lightware HDMI-3D-OPT-TX210RAK User Manual page 54

Legend:
Explanation: The device reports that it has a video crosspoint with 4 inputs and 2 outputs,
and an audio crosspoint with 6 inputs and 2 outputs.
7.3.8. Change video autoselect mode
Description: The autoselect mode of the video outputs can be changed.
Command {AS_V<out>=<state>;<mode>}}
Response (AS_V<out>=<state>;<mode>)
Legend: The output numbers are listed in section
Letter
Explanation: The Autoselect mode of video output1 (and output 2) is enabled and set to
Priority mode.
INFO
The Autoselect mode can be queried by typing the "as_v<out>=?" command.
7.3.9. Change audio autoselect mode
Description: The autoselect mode of the audio outputs can be changed.
Command {AS_A<out>=<state>;<mode>}}
Response (AS_A<out>=<state>;<mode>)
Legend: The output numbers are listed in section
Letter
Explanation: The Autoselect mode of audio output1 (and output 2) is enabled and set to
Priority mode.
INFO
The Autoselect mode can be queried by typing the "as_v<out>=?" command.
Page 54 / 106
<size>:
<layer>:
Format
CrLf
<state>
F First detect mode
P Priority detect mode
L Last detect mode
Format
CrLf
<state>
F First detect mode
P Priority detect mode
L Last detect mode
<number of inputs>x<number of outputs>
See the details in section
 {as_v1=E;P}
 (AS_V1=E;P)CrLf
11.2 on page 101.
Letter
E
D
 {as_a1=E;P}
 (AS_A1=E;P)CrLf
11.2 on page 101.
Letter
E
D
7.3.1 on page 51.
Example
<mode>
Autoselect mode is enabled
Autoselect mode is disabled
Example
<mode>
Autoselect mode is enabled
Autoselect mode is disabled
LW2 programmers' reference