Configuring Thelan Interface - peplink Balance One User Manual

USER MANUAL
Peplink Balance Series

Configuring theLAN Interface

9
LAN Interface settings are located atNetwork> Interfaces > LAN.
Enter Peplink Balance's IP address and subnet mask values to be used on the LAN.
IP Address &
Subnet Mask
This setting specifies the speed of the LAN Ethernet port.
By default, Auto is selected and the appropriate data speed is automatically detected by
Peplink Balance.
Speed
In the event of negotiation issues, the port speed can be manually specified to circumvent
the issues. You can also choose whether or not to advertise the speed to the peer by
selecting the Advertise Speed checkbox.
To enable VLAN configuration, press the
screen will appear:
Click theNew LANbutton to reach the following screen:
Name
This field specified the name of this particular VLAN
Enter Peplink Balance's IP address and subnet mask values to be used on the VLAN.
IP Address
VLAN ID
Please enter a numerical value to identify this VLAN.
This options switches on captive portal for users connected to this VLAN. Users on open
Captive Portal
networks will receive a splash screen, while users on closed networks will receive a login
screen.
DHCP Server
Check the Enable box to enable the built-in DHCP server which serves DHCP requests on
http://www.peplink.com
IPSettings
button under IP Settings. After clicking the link, the following
VLAN-enabled IP Settings
-65 / 227 - Copyright © 2014 Peplink