Introduction And Scope - peplink Balance One User Manual

USER MANUAL
Peplink Balance Series

Introduction and Scope

1
The Peplink Balance series provides link aggregation and load balancing across up to thirteen WAN
connections.
The Peplink Balance 20/30/30 LTE provides a cost-effective solution suitable for power users and home
offices.
The Peplink Balance 210/310 provides advanced features for small business.
The Peplink Balance 380, 580, 710, 1350, and 2500 come with a suite of advanced enterprise-class
features. They areideal single-box solutions for medium to large-sized business environments,andthey
allow service providers to enable highly available multi-network services.
This manual applies to the following Peplink Balance products:

Peplink Balance 20/30 (firmware version v6.1.x)

Peplink Balance 30 LTE (firmware version v6.1.x)

Peplink Balance 210/310 (firmware version v6.1.x)

Peplink Balance 380 (firmware version v6.1.x)

Peplink Balance 580 (firmware version v6.1.x)

Peplink Balance 710 (firmware version v6.1.x)

Peplink Balance 1350 (firmware version v6.1.x)

Peplink Balance 2500 (firmware version v6.1.x)
The manual covers setting up your Peplink Balance and provides a collection of case studies detailing
theadvanced features of the Peplink Balance.
Important Note to Users Upgrading from Firmware 4.7 or below
If your current firmware version is 4.7 or below, please upgrade to Firmware 4.8.2 before upgrading to Firmware
6.1.
Important Note to Users of the Peplink Balance 30 (Classic Edition)
Firmware 5.0 or above is NOT applicable to the Peplink Balance 30 (Classic Edition). For more information
onidentifying the generation of your Peplink Balance 30, please visit our knowledge base at
<http://www.peplink.com/index.php?view=faq&id=231&path=16>.
http://www.peplink.com -6 / 227- Copyright © 2014 Peplink