Configuration - peplink Balance One User Manual

USER MANUAL
Peplink Balance Series

23.8 Configuration

Backing up the Peplink Balance settings immediately after the successful completion of the initial setup is
strongly recommended.
The functionality to download and upload Peplink Balance settings is found at:
System> Configuration
Restore
The Restore Factory Settings button is to reset the configuration to the factory default
Configuration to settings. After clicking the button, you will need to click the Apply Changes button on the
top right corner to make the settings effective.
Factory Settings
Downloading
The purpose of the Download button is to backup the current active settings. Click
Active
Download and save the configuration file.
Configurations
To restore or change settings based on a configuration file, click Choose File to locate the
configuration file on the local computer, and then click Upload.
Uploading
The new settings can then be applied by clicking the Apply Changes button on the page
header, or you can cancel the procedure by pressing discard on the Main page of Web
Configurations
Admin Interface.
(Available on Peplink Balance 210+)
Uploading
In a High Availability (HA) configuration, the Balance unit can quickly load the configuration
Configuration from
of its HA counterpart. To do so, click the Upload button.
High Availability
After loading the settings, configure the LAN IP address of the Peplink Balance unit to be
Pair
different from the HA counterpart.
http://www.peplink.com
Configuration
-189 / 227 - Copyright © 2014 Peplink