Pptp Server - peplink Balance One User Manual

USER MANUAL
Peplink Balance Series

21.2 PPTP Server

Peplink Balance has a built-in PPTP Server, which enables remote computers to conveniently and
securely access the local network.
PPTP server settingsare located at: Network> Misc. Settings > PPTP Server
Simply check the box to enable the PPTP server function. All connected PPTP sessions are displayed on
the Client List at Status > Client List.Please refer to section 25.3 for details.
This setting is for specifying the WAN connection(s) and IP address(es) that the PPTP
Listen On
server should listen on.
(This option is only applicable on Peplink Balance 305 and 380+.)
This setting is for specifying the user database source for PPTP authentication. Three
sources can be selected: Local User Accounts, LDAP Server, RADIUS Server.
Local User Accounts - User accounts are stored in the Peplink Balance locally. You can
add/modify/delete accounts in the User Accounts table below.
Authentication
LDAP Server - Authenticate with an external LDAP server. Tested with OpenLDAP server
where passwords are NTLM hashed. Active Directory is not supported. (You can choose to
use RADIUS to authenticate with a Windows Server.)
RADIUS Server - Authenticate with an external RADIUS server. Tested with Microsoft
Windows Internet Authentication Service, and FreeRADIUS servers where passwords are
NTLM hashed or in plain text.
This setting allows you to define the PPTP User Accounts
Accounts. Click Add to input username and password to create an account. After adding
User Accounts
the user accounts, you can click on a username to edit the account password. Click the
button
http://www.peplink.com
PPTP Server Setting
to delete the account in its corresponding row.
-155 / 227 -
for authentication via Local User
Copyright © 2014 Peplink