USER MANUAL
Peplink Balance Series
16
NAT Mappings
The Peplink Balance allows the IP address mapping of all inbound and outbound NAT'edtraffic to and
from an internal client IP address.
NAT Mappings can be configured at:Network>NAT Mappings
To add a rule for NAT Mappings, clickAdd NAT Ruleand the following screen will be displayed:
NAT Mapping rules can be defined for a single LAN IP Address, an IP Range, or an IP
LAN Client(s)
Network.
This refers to the LAN host's private IP address.The system maps this address to a
number of public IP addresses (specified below) in order to facilitate inbound and
Address
outbound traffic.
This option is only available when IP Address is selected.
The IP range is a contiguous group of private IP addresses used by the LAN host. The
system maps these addresses to a number of public IP addresses(specified below) to
Range
facilitate outbound traffic.
This option is only available when IP Range is selected.
http://www.peplink.com
NAT Mapping Settings
-134 / 227 -
Copyright © 2014 Peplink