Static Ip Connection - peplink Balance One User Manual
Balancemulti-wan
bondingrouters
For more information, please visit peplink.com
Hide thumbs
Also See for Balance One:
- User manual (261 pages) ,
- Manual (2 pages) ,
- User manual (213 pages)
Table of Contents
Advertisement
USER MANUAL
Peplink Balance Series
11.1.2 Static IP Connection
The static IP connection method is suitable if yourISP provides a static IP address to connect directly.
IP Address /
These settings specify the information required in order to communicate on the Internet
Subnet Mask /
via a fixed Internet IP address.
Default Gateway
The information is typically determined by and can be obtained from yourISP.
Each ISP may provide a set of DNS servers for DNS lookups. This field specifies the
DNS (Domain Name System) servers to be used when a DNS lookup is routed through
this connection.
DNS Servers
You can input the ISP-provided DNS server addresses into the DNSserver 1 and
Please refer to Section 11.3, 11.4, 11.5, and 11.6 for details about WAN Health Check, Bandwidth
Allowance Monitor, Additional Public IP Settings, and Dynamic DNS Settings respectively.
http://www.peplink.com
Static IP Settings
DNSserver 2 fields. If no address is entered here, this link will not be used for DNS
lookups.
-76 / 227 -
Copyright © 2014 Peplink
Advertisement
Table of Contents
