USER MANUAL
Peplink Balance Series
24.2 Traceroute Test
The Traceroute Test tool traces the routing path to the destination through a particular Ethernet interface
TM
or a SpeedFusion
connection. The Traceroute Test utility is located at System> Tools >Traceroute.
Tip
A System Administrator can use the Traceroute utility to analyze the connection path of a LAN/WAN connection.
24.3 PepVPN Test
(Available on Peplink Balance 210+)
The PepVPN Test tool can help to test the throughput between different VPN peers.
You can define the Test Type,Direction, and Duration of the test, and press Go!to perform the
throughput test.The VPN Test utility is located at System > Tools >PepVPN Testillustrated as follows:
24.4 PepVPN Analyzer
The bandwidthbonding feature of PepVPN occurs when multiple WAN lines from one end merge with
multiple WAN lines from the other end. For this to happen, each WAN line needs to form a connection
with all the WAN lines on the opposite end. The function of the PepVPN Analyzer is to report the
throughput, packet loss, and latency of all possible combinations of connections.
http://www.peplink.com
-192 / 227 -
Copyright © 2014 Peplink