Ipsec Vpn; Ipsec Vpn Settings - peplink Balance One User Manual

USER MANUAL
Peplink Balance Series

IPsec VPN

13
Peplink Balance IPsec VPN functionality securely connects one or more branch offices to your company's
main headquarters or to other branches. Data, voice, andvideo communications between these locations
are kept safe and confidential across the public Internet.
IPsecVPN onthe Peplink Balance is specially designed for multi-WAN environments. For instance, if a
user sets up multiple IPsec profiles for his multi-WAN environment and WAN1 is connected and healthy,
IPsec traffic will go through this link. However, should unforeseen problems (e.g.,unplugged cables or ISP
problems) cause WAN1 to go down, our IPsec implementation will make use of WAN2 and WAN3 for
failover.

13.1 IPsec VPN Settings

All Peplink products can makemultiple IPsec VPN connections with Peplink routers, as well as Cisco
andJuniper routers.
Note that all LAN subnets and the subnets behind themmust be unique. Otherwise, VPN members will
not be able to access each other.
All data can be routed over the VPN with a selection of encryption standards, such as 3DES, AES-128,
and AES-256.
To configure, navigate to Network >IPsec VPN.
A NAT-Traversal option and list of definedIPsecVPNprofiles will be shown.
NAT-Traversalshould be enabled if your system is behind a NAT router.
Click the NewConnection button to create new IPsec VPN profiles that make VPN connections to remote
Peplink Balance, Cisco, or Juniper Routers via available WAN connections. To edit any of the profiles,
click on its associated connection name in the leftmost column.
http://www.peplink.com -98 / 227 - Copyright © 2014 Peplink