USER MANUAL
Peplink Balance Series
23.6 SNMP
SNMPor Simple Network Management Protocolis an open standard that can be used to collect
information about the Peplink Balance unit.
SNMP configuration is located at:System> SNMP
SNMP Device
This field shows the router name defined in System > Admin Security.
Name
SNMP Port
This option specifies the port which SNMP used. The default port is set as 161.
SNMPv1
This option allows you to enable SNMP version 1.
SNMPv2
This option allows you to enable SNMP version 2.
SNMPv3
This option allows you to enable SNMP version 3.
http://www.peplink.com
SNMP Settings
-186 / 227 -
Copyright © 2014 Peplink