Bypassing The Firewall To Access Hosts On Lan - peplink Balance One User Manual

USER MANUAL
Peplink Balance Series
C.3

Bypassing the Firewall to Access Hosts on LAN

C.3.1 Scenario
There are times when remote access to computers on the LAN is desirable; for example, when hosting
web sites, online businesses and FTP download and upload areas, etc.
In such cases, it may be appropriate to create an inbound NAT mapping for the network to allow some
hosts on the LAN to be accessible from outside of the firewall.
C.3.2 Solution
The Web Admin Interface can be used to add an inbound NAT mapping to a host and to bind the host to
the WAN connection(s) of your choice. To begin, navigate to Network>NAT Mappings> AddNAT Rule
In this example, the host with an IP address of 192.168.1.102 is bound to 211.123.123.100 of WAN1:
Click Apply Changes on the top right corner to complete the process.
http://www.peplink.com -212 / 227 - Copyright © 2014 Peplink