Cli (Command Line Interface Support) - peplink Balance One User Manual

USER MANUAL
Peplink Balance Series
This feature is located in System > PepVPN Analyzer.To utilize this feature, simply choose your profile
from the drop-down menu and clickGo!

24.5 CLI (Command Line Interface Support)

The serial console connector with the Peplink Balance 305, 380 HW rev 5, Peplink Balance 580, Peplink
Balance 710 HW rev 2, Peplink Balance 1350 and Peplink Balance 2500 is RJ-45.To access the serial
console port, prepare a RJ-45 to DB-9 console cable. Connect the RJ-45 end to the unit's console port
and the DB-9 end to a terminal's serial port. The port setting will be 115200,8N1.
The serial console connector with the Peplink Balance 305, 380 HW rev 1 to 4, Peplink Balance 710 HW
rev 1 is DB-9 male connector. To access the serial console port, connect a null modem cable with a DB-9
connector on both ends to a terminal with the port setting of 115200,8N1.
http://www.peplink.com -193 / 227 - Copyright © 2014 Peplink