Speedfusion Tm Status - peplink Balance One User Manual

USER MANUAL
Peplink Balance Series
12.3 SpeedFusion
TM
SpeedFusion Status is shown in the Dashboard. The connection status of each connection profile is
shownas below.
TM
SpeedFusion connection status is also shown on the LCD panel of the Peplink Balance 380, 580, 710,
1350, and 2500.
After clicking the Details button at the topright corner of the SpeedFusion
TM
to Status >SpeedFusion
peer.Please refer to section 25.5for details.
IP Subnets Must Be Unique Among VPN Peers
The entire interconnected SpeedFusion
your sites to prevent connectivity problems when accessing those subnets.
http://www.peplink.com
TM
Status
, where you can view subnet and WAN connection information for each VPN
TM
network is asingle non-NAT IP network. Avoid duplicating subnets in
-97 / 227 -
TM
table, you will be forwarded
Copyright © 2014 Peplink