System Settings; Admin Security - peplink Balance One User Manual

USER MANUAL
Peplink Balance Series

System Settings

23

23.1 Admin Security

There are two types of user accounts available for accessing the Web Admin:admin and user.They
represent two user levels: the admin level has full administration access, the user level is read-only. The
user level can only access the device's status information;itcannot make any changes on the device.
Admin Account UI User Account UI
A web login session will be logged out automatically when it has been idle longer than the Web Session
Timeout.Before the session expires, you may click the Logout button in the Web Admin to exit the
session
0 hours 0 minutes signifies an unlimited session time. This setting should be used only in
specialsituations, as it will lower the system security level if users do not logout before closing the browser.
Default: 4 hours 0 minutes.
For security reason, after logging in to the Web Admin Interface for the first time, it is recommended to
change the administrator password.
Configuring the administration interface to be accessible only from the LAN can further improve system
security.
Administrative Settings configuration is located at:System>Admin Security
http://www.peplink.com -177 / 227 - Copyright © 2014 Peplink