Inbound Access Services - peplink Balance One User Manual

USER MANUAL
Peplink Balance Series

15.3 Inbound Access Services

15.3.1 Definition of Services
Services are defined at:Network> Inbound Access > Services
At least one server must be definedbefore services can be added.
To define a new service, click the Add Servicebutton, upon which the following menu appears:
This setting specifies whether the inbound service rule takes effect.
When Yes is selected, the inbound service rule takes effect. If the inbound traffic matches the
specified IP Protocol and Port, action will be taken by the Peplink Balance based on the other
Enable
parameters of the rule.
When No is selected, the inbound service rule does not take effect. The Peplink Balance will
disregard the other parameters of the rule.
This setting identifies the service to the System Administrator.Only alphanumeric and the
Service Name
underscore "_" characters are valid.
The IP Protocol setting, along with the Port setting, specifies the protocol of the service as
IP Protocol
TCP, UDP, ICMP or IP.Inbound traffic that matches the specified IP protocol and Port(s) will
be forwarded to the LAN hosts specified by the Servers setting.
http://www.peplink.com
Tip
Services Settings
-113 / 227 - Copyright © 2014 Peplink