Product Features; Supported Network Features - peplink Balance One User Manual

USER MANUAL
Peplink Balance Series

Product Features

4
Peplink Balance series products enableall LAN users to sharebroadband Internet connectionsand provide
advanced features to enhanceInternet access. The following is alist of supported features:

Supported Network Features

4.1
4.1.1 WAN

Multiple public IP support (DHCP, PPPoE, static IP address)

Static IP support for PPPoE

10/100/1000Mbps Ethernet connection in full/half duplex

Built-in HSPA and EVDO cellular modems (Available on Peplink Balance 30 LTE)

USB mobile connection(only one USB modem can be connected at a time)

Drop-in Modeon selectable WAN portwith MAC address passthrough(available on Peplink
Balance 210+)

Network address translation (NAT) / port address translation (PAT)

Inbound and outbound NAT mapping

Multiple static IP addresses per WAN connection

MAC address clone

Customizable MTU and MSS values

WAN connection health check

Dynamic DNS (supported service providers: changeip.com, dyndns.org, no-ip.org,tzo.com, and
DNS-O-Matic)

Ping, DNS lookup,and HTTP-based health check
4.1.2 LAN

DHCP server on LAN

Extended DHCP option support

Static routing rules

Local DNS proxy server

VLAN on LAN support
4.1.3 VPN

Secure SpeedFusion

SpeedFusion performance analyzer

X.509 certificate support (feature activation required on Peplink Balance 20/30/30 LTE;
included on Peplink Balance 210+)

Bandwidth bondingand failover among selected WAN connections

Ability to route traffic to a remote VPN peer

Optional pre-shared key setting

Layer 2 bridging
TM

SpeedFusion throughput, ping, and traceroute tests

Built-in PPTP VPN server

Authenticate PPTP clients using RADIUS and LDAP servers (Available on Peplink Balance
210+)

IPsec VPN for network-to-network connections (Works with Cisco and Juniper only)

PPTP and IPsecpassthrough
http://www.peplink.com
TM
(available on Peplink Balance 210+)
-12 / 227 - Copyright © 2014 Peplink