Bandwidth Allowance Monitor - peplink Balance One User Manual

USER MANUAL
Peplink Balance Series

11.4 Bandwidth Allowance Monitor

The Bandwidth Allowance Monitor helps track your network usage.Please refer to section 25.7 to view
usage statistics.
If Email Notification is enabled, you will be notified byemail when usage hits 75% and 95%
of the monthly allowance.
If Disconnect when usage hits 100% of monthly allowance is checked, this WAN
Action
connection will be disconnected automatically when the usage hits the monthly allowance.
It will not resume connection unless this option has been turned off or the usage has been
reset when a new billing cycle starts.
Start Day
This option allows you to define which day ofthe month each billing cycle begins.
This field is for defining the maximum bandwidth usage allowed for the WAN connection
Monthly Allowance
each month.
Due to different network protocol overheads and conversions, the amount of data as reported by this Peplink device
is not representative of actual billable data usage as metered by your network provider. Peplink disclaims any
obligation or responsibility for any events arising from the use of the numbers shown here.
http://www.peplink.com
Bandwidth Allowance Monitor
Disclaimer
-86 / 227 - Copyright © 2014 Peplink