Snmp - peplink HD2 mini User Manual

for configuring the remote system log can be found at System>Event Log.
Remote Syslog
Remote Syslog
Host
Push Events

26.7 SNMP

SNMP or simple network management protocol is an open standard that can be used to collect
information about the Pepwave router. SNMP configuration is located at System>SNMP.
https://www.peplink.com
Event Log Settings
This setting specifies whether or not to log events at the specified remote syslog
server.
This setting specifies the IP address or hostname of the remote syslog server.
The Pepwave router can also send push notifications to mobile devices that have
our Mobile Router Utility installed. Check the box to activate this feature.
For more information on the Router Utility, go to: www.peplink.com/products/router-
utility
244 Copyright @ 2021 Pepwave