26.7 SNMP
SNMP or simple network management protocol is an open standard that can be used to collect
information about the Pepwave router. SNMP configuration is located at System>SNMP.
SNMP Device
Name
SNMP Port
SNMPv1
SNMPv2
SNMPv3
To add a community for either SNMPv1 or SNMPv2, click the Add SNMP Community button
in the Community Name table, upon which the following screen is displayed:
https://www.peplink.com
SNMP Settings
This field shows the router name defined at System>Admin Security.
This option specifies the port which SNMP will use. The default port is 161.
This option allows you to enable SNMP version 1.
This option allows you to enable SNMP version 2.
This option allows you to enable SNMP version 3.
245
Copyright @ 2021 Pepwave