USER MANUAL
Peplink Balance Series
24.6 SNMP
SNMPor simple network management protocol is an open standard that can be used to
collect information about the Peplink Balance unit.SNMP configuration is located
atSystem>SNMP.
SNMP Device
This field shows the router name defined atSystem>Admin Security.
Name
SNMP Port
This option specifies the port which SNMP will use. The default port is161.
SNMPv1
This option allows you to enable SNMP version 1.
SNMPv2
This option allows you to enable SNMP version 2.
SNMPv3
This option allows you to enable SNMP version 3.
http://www.peplink.com
SNMP Settings
-212 / 258 -
Copyright © 2015 Peplink