Table of Contents
Advertisement
Clean the media input section of the stacker
Clean the media input section of the stacker
Before you begin
Make sure you have the following cleaning materials at hand.
• Use GLOVES - UV INK (MEDIUM / LARGE)
• Use Lint Free Cloths (moistened with demi water)
• Demi water
When to do
Clearly visible pollution on the media input section of the stacker can cause pollution on the
printed output.
To clean the media input section of the stacker, do the following.
Procedure
1. Pause the active print job.
1. On the user panel tap on [Jobs]
2. Tap on [Job queue]
3. Select the active print job and tap on [Pause].
2. Move the stacker away from the printer.
3. Put on gloves and use a lint free cloth, slightly moistened with demi water, to carefully clean the
polluted surface.
IMPORTANT
Do not damage the sensors.
216
Chapter 9 - Maintain the print system
1
2
3
Advertisement
Table of Contents
