Oce ColorWave 900 User Manual page 189

5. Select [Alignment type] [Manual (horizontal)] and tap on [Next].
6. You can adapt the alignment values in several ways.
• slide the rulers
• tap on 'plus' or 'minus'
Increase the value to make light lines on your test print darker, decrease the value to make dark
lines on your test print lighter.
Adjust the values and tap on [Finish].
IMPORTANT
Standing in front of the printer, position 0 is the outer left position and position 4 is the
outer right position.
0
1
2
3
4
[Align printheads] - [Manual (horizontal)]
Chapter 9 - Maintain the print system 189