Thin white or dark lines corresponding with printhead boundaries
Step
Action
3
Identify the printhead transitions that need additional manual printhead alignment
(see
tal) on page
4
Align the printheads manually (see
page
5
Check whether the problem is resolved by reprinting the file that showed the problem.
If the problem persists, repeat the steps 3 and 4 (up to 3 times).
6
The best possible result is achieved.
272
Chapter 10 - Troubleshooting
Identify the printhead transitions that need manual printhead alignment (horizon-
185).
187).
Align printheads - Manual (horizontal) on