Clean The Media Input Section Of The Folding Device - Oce ColorWave 900 User Manual

Clean the media input section of the folding device

Clean the media input section of the folding device
Before you begin
Make sure you have the following cleaning materials at hand.
• Use GLOVES - UV INK (MEDIUM / LARGE)
• Use Lint Free Cloths (moistened with demi water)
• Demi water
When to do
Clearly visible pollution on the media input section of the folding device can cause pollution on
the printed output.
To clean the media input section of the folding device, do the following.
Procedure
1. Pause the active print job.
1. On the user panel tap on [Jobs]
2. Tap on [Job queue]
3. Select the active print job and tap on [Pause].
2. Move the folding device away from the printer.
3. Put on gloves and use a lint free cloth, slightly moistened with demi water, to carefully clean the
polluted surface.
IMPORTANT
Do not damage the sensors.
218 Chapter 9 - Maintain the print system
1 2 3