Use Lpr/Lpd To Send A Print Job - Oce ColorWave 900 User Manual

Use LPR/LPD to send a print job

Introduction
The printer supports printing through LPR/LPD.
When you send your print job through LPR/LPD the default Océ Express WebTools settings are
leading.
NOTE
You must enable printing through LPR/LPD in Océ Express WebTools ([Preferences] -
[Connectivity] - [LPD]).
How to send a print job via LPR/LPD
Type the following line command after the Command prompt: lpr -S <hostname or IP address> -P
<print queue name> <file name>.
NOTE
You can use any name for <print queue name>, for example jobs.
Use LPR/LPD to send a print job
Chapter 7 - Print jobs 159