Table of Contents
Advertisement
Patterns in area fills (herringbones)
Script
Step
Action
1
Check whether the media roll you use is almost empty. If yes load a new media roll
(see
2
When you have recently placed a new printhead, perform the 'Replace printheads'
procedure to re-seat the new printhead (see
3
Check whether the problem is resolved by printing a suitable test print. If the problem
persists, clean the print surface and the vacuum holes (see
the vacuum holes on page
4
Check whether the problem is resolved by printing a suitable test print. If the problem
persists, replace the printhead (see
5
Check whether the problem is resolved by printing a suitable test print. If the problem
persists, call your local Service Provider.
Load a media roll on page
66).
Replace printheads on page
203).
Replace printheads on page
Patterns in area fills (herringbones)
227).
Clean the print surface and
227).
Chapter 10 - Troubleshooting
269
Advertisement
Table of Contents
