Table of Contents
Advertisement
Replace printheads
29. Close the maintenance tray cover.
30. On the user panel tap on [Next] several times, and wait while the printheads are prepared for
printing.
31. When selected in step 6, the [Replace printheads] wizard will now assist you to clean the print
surface (See
IMPORTANT
Do not perform step 21 of this procedure for the printhead or the printheads that you
have just replaced.
32. Tap on [Finish] to close the wizard.
After you finish
After printhead replacement it is advised to align the printheads automatically (See
printheads - Automatic on page
240
Chapter 9 - Maintain the print system
Clean the print surface and the vacuum holes on page
181).
203) .
Align
Advertisement
Table of Contents
