Table of Contents
Advertisement
3. Tap on [Maintain wiper rollers] to start the wizard.
4. Tap on [Next].
5. Select the wiper roller(s) and tap on [Start].
IMPORTANT
The positions of the wiper rollers correspond with the positions of the printheads.
Standing in front of the printer, position 0 is the outer left position and position 4 is the
outer right position.
0
1
2
3
4
6. The maintenance procedure takes about 10 minutes. The user panel displays a message when the
wiper roller maintenance is finished. Tap on [Finish] to close the wizard.
Maintain wiper rollers
Chapter 9 - Maintain the print system
195
Advertisement
Table of Contents
