Replace printheads
20. Use the tear notch to open the foil package.
21. Remove the printhead from the foil package.
22. Release the clip retaining the cover near the center of the printhead (1) and carefully remove the
printhead from the orange protection cover (2).
IMPORTANT
Do not touch the ink ports, the nozzle surface or the electrical contacts area while
handling the printhead.
Do not place the unprotected printhead on any surface prior to installation in the
printer.
Protect the printhead from contamination by air-borne particulate contamination such
as dust or fibers.
NOTE
Preserve the orange protection cover. You need this cover to dispose the old printhead.
236
Chapter 9 - Maintain the print system