Table of Contents
Advertisement
5. Select [Alignment type] [Automatic] and tap on [Next].
6. The user panel displays the default printhead overlap value, defined in Océ Express WebTools.
The printhead overlap value sets the number of printhead nozzles that overlap between two
adjacent printheads. Adjust the value, if necessary. Select the media roll to use and tap on [Start].
NOTE
It is recommended to select the media type that you used when the problem that you
want to solve occurred. The minimum media width to align the printheads is A0 (841
mm).
[Align printheads] - [Automatic]
Chapter 9 - Maintain the print system
183
Advertisement
Table of Contents
