Set the print quality
Set the print quality
Introduction
You can use Océ Express WebTools to set the print quality. The choice of the print quality affects
the speed of the job and the ink coverage.
Select a default print quality from the list below:
[Print quality]
[Normal - uniform areas]
[Normal - fine details]
[Enhanced - uniform areas]
[Enhanced - fine details]
Procedure
1. Open the [Preferences] - [Print job defaults] tab.
2. Click on [Edit] in the [Basic] section or click on the [Print quality] setting.
3. Select the correct value.
4. Click [Ok] to confirm, or [Cancel] to reject your entries.
164
Chapter 8 - Adjust the print quality and print productivity
Print
Print speed
speed
[meter per minute]
[inch
per sec‐
ond]
12
18.3
12
18.3
6
9.1
6
9.1
application example
B/W posters with large uniform
areas
Color posters with large uniform
areas, with less saturated colors
This is the default print quality,
suitable for most CAD and poster
applications, both color and B/W.
Color posters with large uniform
areas, with highly saturated col-
ors
CAD & GIS applications - color