[Align printheads] - [Manual (horizontal)]
When to do
When you observe thin white or dark(er) lines along the length of the printed output, at positions
that correspond with the printhead boundaries, and the automatic printhead alignment procedure
does not completely solve the problem, you can perform an additional, horizontal manual
printhead alignment.
Before you begin
Align the printheads automatically on page
1.
2. Print a suitable test print. If the problem is not completely solved,
transitions that need manual printhead alignment (horizontal) on page
Procedure
1. On the user panel tap on [System].
[Align printheads] - [Manual (horizontal)]
181.
Chapter 9 - Maintain the print system
Identify the printhead
185.
187