Differences in optical density in paper feed direction
Differences in optical density in paper feed direction
Introduction
Differences in optical density in paper feed direction are visible on the printed output as 20
millimeters wide, light stripes.
These so called banding stripes correspond to the width of the chips of the printhead.
Script
Step
Action
1
Try a different print mode. Select [Enhanced - uniform areas] instead of [Enhanced -
fine details]).
2
Check whether the problem is resolved by printing a suitable test print. If the problem
persists, replace the printhead (see
270
Chapter 10 - Troubleshooting
Replace printheads on page
227).