Figure 1.34 3.5" Drives; Figure 1.35 Drive Slot Numbers (3.5" Type Drive Enclosure); Table 1.8 Status And Meanings Of Each Led (Drive (Drive Enclosure) (2.5"/3.5" Type)) - Fujitsu ETERNUS DX100 S4 Basic Operation Manual

Chapter 1 Component Names and LED Names
1.2 2.5"/3.5" Type Drive Enclosures
●
3.5" Drives
Figure 1.34 shows the 3.5" drive.
Table 1.8 shows the status and meanings of each LED.

Figure 1.34 3.5" Drives

1. DRIVE READY LED
2. DRIVE FAULT LED

Figure 1.35 Drive Slot Numbers (3.5" Type Drive Enclosure)

The LEDs turn on or blink to indicate the statuses that are listed below.

Table 1.8 Status and Meanings of Each LED (Drive (Drive Enclosure) (2.5"/3.5" Type))

LED name
DRIVE READY
DRIVE FAULT
FUJITSU Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Operation Guide (Basic)
Figure 1.35
1
2
Slot#8 Slot#9
Slot#4 Slot#5
Slot#0 Slot#1
LED status
(green)
(blinks green)
(amber)
Copyright 2017 FUJITSU LIMITED
shows the slot number of each 3.5" drive.
Slot#10
Slot#6
Slot#2
Meanings
The drive is in normal status.
• The drive is in error status.
The LED light up operation was performed from the ETERNUS
•
CLI command line in order to identify the drive location.
38
Slot#11
Slot#7
Slot#3
P3AM-7662-09ENZ0